Dualas Window

Phoebe's Nissan Daulis Drivers Window is no longer winding up and down. 

I assumed the [mechanical] wire had broken the way it used to on both the Ute and the Vito so I had a look on line and purchased that part of the mechanism. 

Watched a YouTube video. 

Began to dismantle. 

Pried the cover off the handle using a flat blade at the bottom. 

per the video the top screw is posi and the bottom is Torx. In my case the bottom screw had been gronched by a previous fixer.   Two trip to bunnings to buy torx.  The second set I could hammer it in. 

The connectors have a little tit. To remove the connector,  use a small flat blade to push the lug back toward the body of the connector. 

By Good luck the window had gotten stuck at the position it needs to be to unscrew the glass from the mechanism. 

next unscrew the plate. 

Then one bolt that holds the door opener. Slide it and move it.  Behind it is a bolt that connects to the top of one of the slides. To the right is the other bolt. 

Remove 3 screws (self tappers) that hold the motor in place. 

Motor

The three slots in it motor should link with three lugs in it mechanism but they were sheered off.

Old and new side by side

One of the pop rivits still had the steel shaft making it difficult to drill. 

Cut away with the dremmel and then ripped it out with pliers from the other side. 

Phoebe kept a eye on things just to make sure.....