Whipper Snipper Reassemble

5-APRIL-2026

WHIPPER SNIPPER REASSEMBLY

Had to cut the old pipes off the carbie. 

Took a couple of attempts to reassemble.

Push the grommet close to the carbie.  

Push in the grommet and the o-ring.

Screw the fuel tank in place. 

Screw the carbie in place. 

Note that one can pull it hoses out of the grommet but you can't push them back in so you need to start with them too short ie carbie close to the fuel tank and then pull the tubes to get the carbie in place. 

Finally un screw the posidrive screw securing the throttle cable and connect it up and re insert the screw.