Tiida Plug and Coil Pack Change

 TOOLS

2 flat blade screw drivers

Video

https://youtu.be/2g6dCU6xOtU

 

Narrow 

 1  COVER
2 bolts.  10mm socket.  Squeeze two plastic clips at front

AIR INTAKE
Needs to be removed to access the right hand bolt on the air intake maniforld
need 2 flat blade screw drivers to lever up the joins to other plastic pipes

AIR IN MANIFOLD
Back left 10mm socket.  Bolts into engine.
Front 3 x 10mm Socket with long extension.  very tight.  need better sockets as the cheap ones i have jump slip round the heads.

Throttle Body

 

Plenum
REmove
Vacuum hose back left.
Backing plate Back Right

Replace:
Clean mating surface. 
Bolts Inside to outside to stretch gasket out not in. 20ftLpbs

 Throttle Body
6 ft lbs

Before we start.

The first thing is to remove the large plastic cover.  Two bolts toward the back and two push up and out thingos at the front underneath.

Next remove the air intake.  Need a medium flat blade to leaver up the push in fixings.  Then two flat blades to disconnect the various plastic pipes.  There was evidence that someone has done this in the past.

Then remove the dip stick (yellow) and the radiator over flow tank (White to the left.

The bolts from the PLENUM were stripped.  More evidence that someon ein the past took this all apart.

Used a M6 tap to clean them up.

The bolts were in worse conditon than the above embedded nuts.  Used a M6 die to clean up the thread.